Concentrated mesh degreaser.
Concentrated liquid, for 1:30 to 1:50 dilution.
To clean the mesh prior to coating the emulsion or film.
Dilute the product by 1:50 – Add 1 liter of VARIOPREP 0031 in 50 liters of water.
For better cleaning efficiency, more concentrated solutions can be prepared by using less water. For example, the concentrated degreaser can be dissolved by 1:30.
When using automatic cleaning equipment, follow the instructions of the machine manufacturer regarding to the volume that has to be prepared, feeding into the tank and equipment operation.
In case of foaming, add 10 ml of VARIOSTOP 0950 to the tank of degreasing solution.
For manual operation, wet the mesh and apply the VARIOPREP 0031 diluted solution with a soft nylon brush. Gently brush it over the whole surface, on both sides of the fabric.
Wash with water until all product is dissolved and no residues are left.
Dry the screen completely before coating the emulsion.
Do not touch the fabric after it has been degreased.
* The air generally contains particles, which can contaminate the fabric. For this reason it is recommended to degrease the screens just prior to use the emulsion or film.
Read the MSDS before using the product.
In case of contact with eyes, rinse opened eyes for several minutes under running water.
It is advisable to wear protective gloves.
Risk Phrases: Not applicable.
Safety Phrases: Not applicable.
This information is based on our best current knowledge. This product is solely intended for industrial use. No warranties are made or implied. Agabę will not be held liable for claims related to any party's use or reliance on information or recommendations contained herein.