.:: AGABÊ ::..

English

Português BR

Español

You are in: Agabê EN > Products > Type of Product > Emulsions > Unifilm

Unifilm

Extremely good definition and resolution.
Resistant to all inks and cleaning solvents.
Fast exposure. Easy reclaiming.

Outstanding stencil flatness (low Rz values) that assures perfect definition and excellent resolution
Exceptional level of details
For solvent, plastisol and water based inks

Superb resolution and sharp edge definition with low Rz values.
Wide expoure.
For UV and solvent inks. Resistant to clean with alcohol.

65% solids with medium viscosity. Provides fast and cost effective coasting process for hight quality stencils: low Rz values with fewer coatings.
For UV and solvent based inks.
Wide expouse latitude. Easy to reclaim.

Ideal for printing halftone dots in banners and posters.
For UV and solvent based inks. Resistant to cleaning with alcohol.
Super fast exposure.
Excellent cost x benefit ratio.

Low cost photopolymer emulsion.
Resistant to solvent based and UV ink.
Easy to wash out and reclaim.
Short expouse time and good edge definition.

Ultra fast exposure. Ideal for direct projection systems.
Resistant to solvent and conventional UV inks.

To print fine lines and precise details with plastisols and water based inks.
Short expouse time and wide expouse latitude.
Long print runs on automatic or manual presses.

Low cost photopolymer emulsion.
Excellent definition and resolution with expouse.
To print with plastisols and water based inks.

For printing thick layers with plastisol, gel, silicone, water and mineral spirit based inks.
Also suitable for printing glass powder and special inks for the ceramic industry.
Super fast exposure. Ready to use.
Long print runs.
High solid content. High viscosity.
For stencils up to 1500 µm, coated wet on wet, on meshes with 20 to 110 threads/inch (8 to 43 threads/cm).

For printing thick layers with plastisol, water, mineral spirits and oil based inks.

High solid content.

Fast exposure with wide latitude.

Great mesh adhesion for long print runs.

For coating up to 800 µm (wet on wet) on meshes with 81 to 230 threads/inch (32 to 90 threads/cm).

For printing thick layers with high density plastisol and solvent based inks.
Very short exposure time.
Easy to reclaim.
Perfect for technical and industrial applications, for high thickness and excellent image definition. For electronic components, engine gaskets and texts in Braille system.

Ultra fast exposure. Ideal for direct projection systems.
Resistant to plastisols, sublimation, reactive and water based inks.
Sharp images with high color contrast.

Micronized Diazo with improved solubility, for easy dissolution.
Can be added directly into Unifilm emulsions.
Improves the resistance of the emulsions to water based products.
Widens the exposure latitude, making it easier to achieve the correct exposure time.
Available in pouches with 1 gram (for pots of 900 ml) and 4 grams (for gallon of 3.780 ml.)

Agabe.com all rights reserved. End.: Rua Madre de Deus, 719 - CEP 03119-001 - São Paulo-SP - Brasil Tel.: (55 11) 2606-0404