Archives
The easiest, fastest and most economical way to prepare thick stencils
Emulsions
Broad range of photographic emulsions, for the
preparation of stencils with perfect definition
and high resolution.
Innovative products for the
most demanding applications.
Unifilm
Pre-sensitized pure photopolymer emulsions
Dualfilm
Dual cure emulsions (diazo + photopolymer)
Decafilm
Emulsions sensitized with diazo or dichromate
Dirafilm
Emulsion sensitized with direct addition diazo (D. A. D.)
Laser Screen
Emulsion for exposure with laser
AGABÊ
Diazo sensitized emulsions
Screen foto
Dichromate sensitized emulsions
Chemicals
Complete line for the whole stencil making
process: from mesh stretching to reclaiming.
Mesh stretching
Decafix frame adhevise - two components,
one component or instant dry
Mesh preparation
Decafix frame adhevise - two components,
one component or instant dry
Mesh preparation
Decaprep - mesh degreaser and conditioner
HB10 - degreasers
HB12 - abrader and degreaser (paste)
Positive and negative making
Opak - ink for positives
Opak laser - image darkener (toner)
Washing out
HB 70 liquid light - exposure enhancer
Finishing
HB 20 Fast and Normal drying - removable blockouts
HB 20 Acqua - permanent blockout
Post treatment
HB 72/76 - stencil hardeners
HB 74/78 - stencil catalysts
Printing
HB 80 - permanent adhesive
Matt glass - glass etching process
Open screen - mesh opener (spray)
Stencil reclaiming
HB 50 - stencil removers
HB 52 - ink removers
HB 54 Super or Normal - haze removers
Decasolv LM - solvents for cleaning stencils
Decaclean HR - one component haze remover
Decaclean MIX (A+B) - all-in-one
Accessories
Special products designed to guarantee quality
and productivity.
AGABÊ Test Positives for regular and for thick stencils
Aluminum frames
Aluminum scoop coaters with plastic ends
Brushes for frame adhesive and reclaming
Hardness meter for squeegee blades
Illuminated microscope - 100x magnification
Pneumatic stretching clamps
Squeegee holders (aluminum and wood)
Squeegee blades
Tensionmeter
Training videos
Wash out spraying hose.
UNIFILM 3D EMULSIONS
The perfect choice for a thick stencil.
UNIFILM 3D are pure photopolymer emulsions, specially developed for thick stencils for the textile, ceramic and industrial markets. The advantages of UNIFILM 3D in comparison to capillary films and traditional emulsions are amazing:
- High viscosity:
Due to their high viscosity, they do not
run down or drip during the coating
process, allowing the build-up of thick
layers without intermediate drying.
- High solid content:
It guarantees a low thickness loss during
the drying process.
- High definition:
Provide sharp edges that are
independent of the mesh structure,
even for coarse meshes.
- Pre-sensitized:
It is not necessary to add any sensitizer.
UNIFILM 3D come ready to use and they
can be used for over two years.
- Fast exposure:
Even for thick layers, the exposure time
is very short - it is about ten times shorter
than a stencil of the same thickness
made with a traditional diazo emulsion.
- Long print runs:
They provide longer print runs due to
their perfect adhesion to the mesh.
Three versions are available:
UNIFILM 3D
- For printing thick layers
with plastisol, gel, silicone,
water and mineral spirit
based inks.
- Also suitable for printing
glass powder and
special inks for the ceramic
industry.
- For stencils up to 1500 μm
on meshes with 8 to 43
threads/cm (20 to 110
threads/inch).
UNIFILM 3D-Light
- For printing fine details
even in thick layers,
with plastisol, water,
mineral spirits and oil
based inks.
- Wider exposure latitude.
- For coating up to 800 μm
(wet on wet) on meshes
with 32 to 90 threads/cm
(81 to 230 threads/inch).
UNIFILM 3D-Solv
- For thick prints with
high density plastisol and
solvent based inks.
- Perfect for industrial
applications, printing
texts in Braile system,
electronic components
and engine gaskets.
- Up to 1200 μm on
meshes with 21 to 77
threads/cm (53 to 195
threads/inch)
With UNIFILM 3D, it is easy to obtain
the right thickness on any mesh.
The easiest, fastest and most economical way to prepare thick stencils
.pdf