Liquid Light (Exposure enhancer).
Ready to use or concentrate.
Reacts with the screen emulsions, completing the light exposure reaction. It is specially recommended for stencils
for half tone dots and fine details.
Dilute 1 liter of HB70 Concentrate in 4 liters of water.
Wash out the stencil in the usual way (Fig. 1).
After the image has appeared completely, stop washing.
With the stencil still wet, apply Liquid Light HB70, first on the squeegee side of the stencil (where exposure is weaker)
and then on the external side. Use a soft sponge (Fig. 2).
Let the product react for about 30 seconds.
Rinse with plenty of running water (Fig. 3). Dry and finish the stencil as usual (Fig. 4).

Make sure the stencil is properly washed out before applying the Liquid Light HB70. If there are spots that were not washed out properly, these will react with the product as if the remaining emulsion was exposed to light.
Read the MSDS before using the products.
Avoid contact with the eyes and skin. In case of contact with eyes, rinse opened eye for several minutes under running water.
This information is based on our best current knowledge. This product is solely intended for industrial use. No warranties are made or implied. Agabê will not be held liable for claims related to any party's use or reliance on information or recommendations contained herein.