MESH DEGREASER
AND CONDITIONER
PRODUCT:
Mesh degreaser and conditioner.
FORM:
Gel (viscous liquid).
USES:
To clean and prepare the mesh prior to coating the emulsion or film.
PROPERTIES:
- Degreases all types of screen fabrics: nylon, polyester and stainless steel. For new and reclaimed meshes.
- Completely removes all greases, particles and other impurities.
- With its innovative ADHESION PROMOTER, the adhesion of emulsions and films to the mesh is considerably improved, increasing print runs.
- Improves the quality of the emulsion layer, reducing Rz value and the number of coating defects.
- Improves the flow of emulsion through the mesh.
- Reduces the number of pinholes in the stencil, avoiding unnecessary touch ups.
- The product is ready to use. No other chemical treatment is required after the degreasing operation.
- Does not damage the mesh.
INSTRUCTIONS:
Wet the mesh (Fig. 1) and apply the Decaprep Conditioner with a soft brush. Gently brush it over the whole surface, on both sides of the fabric (Fig. 2). Foaming is an indication that the mesh is treated.
Wash with water until all product is dissolved and no residues are left (Fig. 3).
Dry the screen completely before coating the emulsion or adhering the film.
Do not touch the fabric after it has been degreased (Fig. 4).
* The air generally contains particles, which can contaminate the fabric. For this reason it is recommended to degrease the screens just prior to use the emulsion or film.
WARNINGS:
Read the MSDS before using the products.
In case of contact with eye, rinse opened eye for several minutes under running water.
It is advisable to wear protective gloves.
ADDITIONAL INFORMATION:
This information is based on our best current knowledge. This product is solely intended for industrial use. No warranties are made or implied. Agabê will not be held liable for claims related to any party's use or reliance on information or recommendations contained herein.